GANKING Car Door LED Logo Projector Ghost Shadow Lights Welcome Lamp Easy Installation for Acura(4 pack)

Excellent quality with metal heatsink... only issue was my car’s factory wiring was too short on the front to have the logo facing the correct way so i used the male and female quick connectors and cut them in half to fit on the pins and added a short wire to lengthen so i could rotate the logo. Looks perfect

I tried all 4 and none worked at first then i noticed that the pins on the light did not line up with the holes on the plug in the car. Once i bent down the pins they all work but the second problem is that the plugs in the car DO NOT click securely to the light and instead just sit loose so after driving a while i imagine they will eventually wiggle themselves loose and i will need to take them out and plug in again. The third issue is that the edges of the lighted sign are kind of fuzzy looking. The middle of the acura sign and the C U R A are nice and sharp but the first letter A looks fuzzy and out of focus on all 4 lights. For the money i might keep, i will see in the 30 day return window how many times i have to take out and plug in again. And how easy that process will be as they felt like a very tight fit going into the car.

Just installed on my 2011 MDX. Love it. Had 3 issues fixed 2 of them1) It wont turn on - turns out I had to lower the 2 metal strips slightly for it to slot correctly in the socket. worked for all2) The plug doesn't lock in socket unlike OEM, not too bothered as considering length of wire and sturdy placement I doubt if this will be an issue but time will tell3) Just as someone else reported for the front the logo was appearing in wrong direction, I just tried all four and one of them worked, similar for passenger front side. Now all four face correctly.

I bought the Acura version and I loved the lights. These lights certainly added a bit of charm to my car :-).Couple of issues while installing:- Light pins would not insert inside the adapter connector. I had to bend both pins in light using a flat screwdriver a bit to align them to adapter pin slots.- Light did not fully "click" or latch to the adapter, like original lights. There is a possibility connections to adapter may come lose over the time.I would not yet throw away my original lights, just in case.

3 out of 4 units worked, 1 dead. 2 out of the 3 that worked I had to manipulate the connecting pins to make a good contact. Unlike the OEM courtesy lights, the wire plugs does not latch in place in the receptacle. It plugs in snugly but maybe later on the connection may come loose so that’s a concern. I anticipated some quality issues that’s why I ordered the 4 pcs to use for the 2 doors in my car that has a courtesy door lights. The illumination of the graphics is bright enough. Although, I received some compliments about it, I do not like how the words “ACURA” has a slight curvature to it. Small detail but if you look at it long enough it is noticeable. For what it’s worth, it is a cool aftermaket install for your car. I would gladly pay a little more if they can improve the build quality and pay close attention to the graphics detail.

I thought these things were garbage but all I had to do was take a flathead screwdriver and push the connectors downward a little bit and then they worked good. At first the lights wouldn't connect properly and were flickering on and off. The only complaint I have is that the letters in 'ACURA' aren't perfectly straight.

I got a lot of compliments when guests open my car doors. I wish it was a little brighter but overall, it's a fun and fancy light to have.

Three out of four lights we're broken when I receive the item. On the positive note they look cool.