PUCKY CV40 Carburetor Replacement for Harley Davidson Road King Twin Cam 1200 XLH1200 Sportster 883 XL883 1998-2016 / Softail 1988-2017 / Dyna FXR FXD 1988-2016 / Touring 1988-2016 27490-04

This product is made in China, but it is well-made. I have used other Chinese products, but they were not good, so I threw them in the trash. I bought this product thinking I could throw it away again, but I feel good because I bought it well. It is an excellent product that is not inferior to the Harley CV40 product. If you are thinking of buying it, I would like to recommend it.The shipping was very fast. The air cleaner bolt size is inch bolt size, so I was able to use the existing air cleaner bolt right away, which was very nice. It works perfectly. I highly recommend this product.

This carb fits great and fixed my bad idle due to to clogged jets. Starts up easy, idles perfect, and the quality feels great!

My bike; Stage 2 2003 Twin Cam 88Purchased this carb after my OE Harley CV40 had egg shaped float pin holes, preventing float pin from seating. Installed and works GREAT! But take note of the following;- the float bowl does NOT have an overflow and is slightly shorter. I swapped my float bowl from my stock carb. No issues with fitment or function.- float heigh is surprisingly accurate, did not need to adjust further. But you MUST check it!- This is a cheap Chinese carb and as such, you MUST take the float bowl off and inspect for manufacturing debris. On mine you can tell the assembler used too small of a screwdriver to install the jets and left witness marks. I transferred my aftermarket jets over.- Idle mix screw is not covered, a plus! But it is tight and I recommend carefully working the screw in and out to loosen it slightly. From LIGHTLY seated, back out 1 3/4 turns for starting tuning.- before installing air filter make sure the accelerator pump is primed and squirting fuel.Mine fired right up with no issues. Set your expectations; it’s a cheap carb that does a great job. I bought a used carb off eBay and had issues that could not be seen without disassembling, so keep that in mind.

I was very skeptical in the beginning but for the price I thought I would give it a try I purchased one of these carburetors and I put it on my fat boy Harley Davidson. It went on and mounted up exactly like a Harley carburetor there’s really no difference between the two in the carburetor I had on my fat boy is giving me a lot of problems. This carburetor once to put it on and adjusted everything got everything right I started writing it and was really shocked at the immediate power difference as well asJust a sheer performance no more backfiring the smooth increase in RPMs and back down so just to tell you from somebody who is now used three of them on three different bikes I have all outperformed the original carburetors and I have passed the test of quality for me and I build bikes

wont work on Harley without replacing many parts with old carb

The media could not be loaded. I bought an old sportster from an auction sight unseen, the original carb was missing parts and pieces, bought this pucky carb, moved the choke components from the stock to the pucky one. Put it on, and this video is the first time this bike ran since 2007. I had to adjust the idle about 1/2 turn. I'm amazed how well this works.

Wasted money with this carb. Inspected it and compared it to my keihin cv carb. The bowl is a little larger and there is no overflow. Installed and went to hook up fuel line and the fuel inlet came apart. After I repaired that by tapping a taper into it then lightly tapping it back in place I turn the fuel on and fuel leaked from around the accelerator pump. Took it off took it apart and the seat for the pump diaphragm was so poorly routed that the diaphragm doesn't quite line up. Wasted too much time with it already so I canabalized it for whatever screws and parts I could use when I rebuild my old keihin carb.

It came on time and was just like it said. Easy to install. Works great.