FREEDY Dual Wireless Charger (Black)

Great wireless charger! Can charge 3 devices off the single charger - now have added QI battery adapters for our S3 and S4 as well!

Once I started using Qi wireless charging, I was immediately hooked - and started looking for ways to charge all my devices wirelessly.Unfortunately, although the single Qi chargers I've tried have worked pretty well, I didn't have the same luck with the dual chargers. There are only a few available, and the ones I tried (which was just about all of them), didn't work reliably at all.Anyway, I finally decided to try this Freedy model out - even though it was more expensive than the alternatives.It's not perfect, but here are the things I like about it:1) It works! It's very easy to position devices on it and the Freedy charger picks them up every time in both positions. It's also pretty fast; although, that doesn't matter a lot to me since I use it on my nightstand to charge devices overnight.2) It has rubber, non-slip feet so it doesn't slide around. That may seem like an obvious feature that all these dual chargers would have - but several of the other models don't...3) It's a good shape for charging a couple of devices simultaneously, without being too big. I can easily charge my Kindle Paperwhite and my phone at the same time.4) There are no 'beeps' to indicate a device has been charged. It's irritating to have something beeping all night on the nightstand, and that's not a problem with this.5) It includes a USB charging port on the side if you need that. Personally, I'm not using it - but it is there.Although this is the best dual Qi charger I've found, and I'm very happy with it, there are some issues to keep in mind:1) The wall plug is GIANT. I had to reposition the surge protector behind my nightstand just to get it to fit with this plugged in. (It does include EU style plugs - which is part of the reason it's so large.)2) As I mentioned, it doesn't beep - but it does have a bright red light for each charging position. Personally, I dimmed those down because they're too bright for a bedroom - and I'll add some pointers on how to do that at the end of this review.[Conclusion]If you're looking for a dual Qi charger, then I think this is the best option available right now. The Energizer model seems to be discontinued, or I would have tried it - but I did try just about every other model.I would definitely recommend this for dual Qi charging![Dimming the Charging Indicators]For those who want to dim the charging indicators, here is what I did. Just keep in mind that this will probably VOID the warranty, so you may want to just throw a small piece of electrical tape over the lights if you don't want to take it apart.1) In order to take this charger apart, you need to take the rubber feet off first. Just pull on the side with your fingernail and they'll pop right out. BE CAREFUL NOT TO LOSE THEM.2) At this point, you'll see a small screw under each of the feet, simply unscrew these and set them aside.3) The trickiest part is undoing the clips. I held it with the USB port facing up and the bottom facing toward me, and then used a thin knife to undo the clip immediately to the left of the USB port (in the center). Once that's done, follow around the rest of the charger with the knife while carefully undoing the remaining clips.The process isn't that hard; so, if you feel like something is going to break, you're probably not doing it right. Personally, I also found it helpful to insert a thin screwdriver on the first corner to keep it unclipped.4) Once the back is off, you'll notice wires going into both sides. The side with the USB port comes off by just removing the single screw and lifting up. The side opposite the USB port is held in place by clips - but BE CAREFUL TO NOTE HOW IT'S CLIPPED IN PLACE because it's a bit tricky putting it back.5) At this point, I used a small square of electrical tape to cover the light-emitting part on both sides. It took some experimentation to get it in the right position to dim the light to the level I wanted.6) Once you have it how you want it, put both sides back in place and then snap the back cover back on. Then replace the screws that were in place under the feet and stick the rubber feet back into place.If you got it apart OK, you'll find the re-assembly is actually very easy.That's it! This took about 10-15 minutes and solved the biggest problem with this wireless charger.Remember, once again, that this will probably VOID your warranty if something gets messed up. I'm only putting these instructions here to get you pointed in the right direction if you decide to do this little mod.

This is wonderful I can easily charge my 2 smart phones with wireless charging capabilities at the same time. One is a Droid Turbo and the other is a Galexy S6. I even have an adapter for a plug in my van and it works in there as well.

good