Description
- ✔High Temperature Performance: With no PEEK or PTFE in hot regions of the HotEnd you can reach 300C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 400C.
- ✔This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates Hot End meltdown failures associated with PEEK/PTFE designs. Although the latest v6 hot end has a PTFE liner inside the hot end this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
- ✔High Quality Printing: E3D has kept their acerb thermal transition that gives the high quality printing performance users have come to expect from E3D hot ends. For the user this means sharper more accurate prints that have less stringing, oozing or blobs on the prints.
- ✔Adaptable To Suit Your Needs: 3D's range of nozzle sizes gives you more opportunity to choose how you want to print. While the default 0.4mm nozzle gives great prints with a good balance of speed, ease and resolution we are offering a range of nozzles that have special geometries that are tailored to the specific needs of how you want to print. Easy No-Solder, No-Tape, No-Adhesive assembly and maintenance.
- ✔Easy No-Solder, No-Tape, No-Adhesive assembly and maintenance: E3D has eliminated tape or any other adhesives from the assembly process of v6. The new thermistor simply clamps into place with a small screw, high temperature glass sleeving is used to insulate the thermistor legs. This makes installing or removing the thermistor a quick and clean process compared to previous methods involving fiddly taping. No soldering is needed as we supply solder free ferrules for making heat-resistant, quick.
Overview: The e3d V6 J-Head Bowden Extruder Hot End Full Kit for E3D is our market-leading signature Hot End: Smaller, Easier, High Performance We've kept our sharp thermal transition that gives the high quality printing performance users have come to expect from E3D Hot Ends. A sharp thermal break gives better control over filament output so you get more immediate start and stops when extruding as well as retracts that are more effective in combating ooze. This means sharper, more accurate prints that have less stringing, oozing or blobbing. Spec: All Metal V6 Hotend Full kit: 12V/40W heater, the temperature can up to 280°C（Long-term temperature: 240°C/ short-term temperature: 280°C） 12V high speed fan with shroud One meter long PTFE/teflon tubing 4mm OD 2mm ID PC4-01 Tube Fitting Extruder Tube: Type: Nozzle Throat Outer Thread: M6 M7 Outer Diameter:6mm Inner Diameter:4mm Teflon Pipe Inner Diameter: 2mm Length: 22.5mm Filament Diameter: 1.75mm Material : Stainless Steel Brass Nozzle: Type: Extruder Brass Nozzle Print Head Color: Golden Material: brass Input Diameter: 1.75mm Output Diameter: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm Included: 1 x All Metal V6 hotend Extruder 1 x 12V high speed fan with shroud 1 x 1 meter long PTFE/teflon tubing 4mm OD 2mm ID 1 x PC4-01 Tube Fitting 1 x 0.2mm Nozzle 1 x 0.3mm Nozzle 2 x 0.4mm Nozzle 1 x 0.5mm Nozzle 1 x 0.6mm Nozzle 1 x 0.8mm Nozzle 1 x 1.0mm Nozzle 5 x 1.75mm Stainless Steel Nozzles Throat 1 x M4 Hex Driver
